Proxmox Pulse
Networking, VLANs & Security Hardening
Proxmox SDN Firewall Audit for VE 9.2 Network Zones
New SDN interfaces can bypass old bridge rules, so audit Proxmox VE 9.2 zones before cross-tenant traffic slips through.
10 min read
Tag
#proxmox-ve
44 articles tagged proxmox-ve.
Storage, ZFS & Backup Strategies
PBS 4.2 S3 Restore Test Guide for Proxmox VMs and CTs
A backup success flag can hide a broken restore path, so this test proves Proxmox S3 recovery boots and verifies data.
11 min read
Networking, VLANs & Security Hardening
Proxmox VE 9.1 Network Audit Checklist Before New VMs
A ten-minute host audit can stop VMs from inheriting broken bridges, missing VLAN tags, and open management ports.
10 min read
LXC Containers & Docker
OCI LXC in Proxmox 9.1: Five Production Traps to Fix
The traps that break OCI LXC at 2 a.m. are boring: backups, kernel updates, and storage you can fix in staging.
8 min read
LXC Containers & Docker
OCI LXC Backup in Proxmox VE 9.1: vzdump Restore Guide
Snapshot-mode backups keep Docker running, but a missing OCI image reference can break restore on another Proxmox node.
10 min read
Installation & Initial Setup
Proxmox VE on Raspberry Pi 5: ARM64 Low-Power Guide
Turn a Pi 5 into a 5–8W homelab hypervisor that runs Docker-ready LXC containers and ARM64 VMs without x86 overhead.
10 min read
Virtualization & VM Management
Proxmox vs VMware 2026: Homelab vs Enterprise Guide
The real question is not free versus paid, but how much migration risk and support you want to own in 2026.
11 min read
Installation & Initial Setup
Proxmox Datacenter Manager Homelab Cluster Setup Guide
Three nodes, one API user, and a checklist turn a fragile homelab into a cluster you can rebuild in under an hour.
10 min read
LXC Containers & Docker
Docker Compose on Proxmox VE 9.1 OCI LXC Setup Guide
Run Docker inside an OCI LXC, then let Proxmox firewall and PBS snapshots handle isolation and fast restore.
9 min read
Installation & Initial Setup
Automated Proxmox VE Node Install with Data Center Manager
Write one preseed, match it to a node by MAC, and watch a bare-metal Proxmox box boot, install, and register unattended.
10 min read
LXC Containers & Docker
Proxmox OCI LXC: Docker Swarm and K3s Backup Setup
Stop stitching two backup systems together: put Swarm or K3s in one OCI LXC guest and let Proxmox do the work.
9 min read
LXC Containers & Docker
Docker LXCs on Proxmox: Isolate Services for Backups
Split Docker workloads into separate LXCs so a bad compose file cannot take down your reverse proxy at 2 a.m.
10 min read
Networking, VLANs & Security Hardening
VLAN vs VXLAN in Proxmox VE: Choosing the Right SDN Zone
If your nodes cross routed hops, VXLAN can save you from VLAN sprawl—but only if you really fix MTU first.
12 min read
Virtualization & VM Management
Proxmox 24/7 Support: Which Subscription Tier Pays Off
The last honest objection to Proxmox in production was "nobody answers the phone at 2am on a Sunday." That ends on 19 October.
9 min read
Networking, VLANs & Security Hardening
Proxmox Auth Bypass CVE-2023-54391: Detect and Fix It
A single unvalidated parameter on the login endpoint skips the password check entirely - and every affected release is already end of life.
8 min read
Installation & Initial Setup
Proxmox VE 9.3 Upgrade Guide for a Rolling Cluster
An untested backup is a hope, not a safety net. Here's how to make Proxmox VE 9.3 upgrades actually boring.
9 min read
Virtualization & VM Management
Proxmox VE 8 End of Life and Your Three Sane Paths Forward
Proxmox VE 8 VMs keep running past end of life — but the patch stream stops, leaving the hypervisor open to new flaws.
8 min read
Installation & Initial Setup
Upgrade Proxmox VE 8 to Proxmox VE 9 Before August 2026
Before August 2026, that running Proxmox VE 8 node is quietly accumulating unpatched vulnerabilities.
8 min read
Virtualization & VM Management
QEMU 11.1 Stable Release and Proxmox VM Impact Explained
Every VM migration, GPU passthrough, and disk read flows through QEMU, so this stable update quietly matters.
2 min read
Virtualization & VM Management
VMware Per-Core Pricing vs Proxmox VE Renewal Savings
A July 2026 VMware change makes every physical core billable, tripling small-cluster renewals unless you compare first.
8 min read
Storage, ZFS & Backup Strategies
Upgrade OpenZFS on Proxmox VE or PBS Without Data Loss
A single irreversible feature flag can strand your whole cluster. Here's my pre-upgrade workflow before touching ZFS.
9 min read
Installation & Initial Setup
Proxmox VE 9.x Post-Upgrade Tuning Checklist for Production
Your new hypervisor works out of the box, but hidden config drift quietly throttles performance under real workloads.
9 min read
LXC Containers & Docker
Docker-in-LXC vs KVM for Homelab: Which Saves More RAM
A single Proxmox node can run dozens of Docker-in-LXC containers before hitting practical limits, and the memory savings add up fast across ten or more workloads.
10 min read
Storage, ZFS & Backup Strategies
Tune Your Homelab ZFS Pool on Proxmox VE
Most homelabbers install a five-disk RAID-Z2 array in Proxmox VE then ignore it until backups start taking hours — here's what actually matters about pool tuning.
12 min read
Installation & Initial Setup
Proxmox Bonding: Active-Backup vs LACP for Network Resilience
Bonded interfaces on Proxmox VE let VM traffic flow across several cables instead of a single port, so when an SFP fails you don't lose everything at once. The real question is which bonding mode matches what your switch can actually do — active-backup for simplicity or LACP for throughput.
9 min read
LXC Containers & Docker
OCI Containers vs LXC in Proxmox VE — Storage, Networking & Performance Guide
Proxmox VE's new OCI runtime uses a different stack than LXC — here's how overlay2 beats fuse-overlayfs in write-heavy workloads and when each actually makes sense on modest hardware.
7 min read
Networking, VLANs & Security Hardening
VLAN Tagging for Proxmox VE: Bridges, Containers & Firewall Rules
Most people configure their bridges correctly but still lose traffic between subnets because they misunderstand which packets get tagged, when, and why it matters for your switch ports.
10 min read
LXC Containers & Docker
Docker Storage Drivers: fuse-overlayfs vs overlay2 for Proxmox LXC
Most homelab workloads run fine with fuse-overlayfs in an unprivileged container. The real decision comes down to your storage backend, I/O patterns, and whether you need GPU access.
9 min read
Installation & Initial Setup
LVM-thin vs ZFS Root Storage for Proxmox VE: A Practical Guide
That single installer choice shapes how your backups behave years later — here's what actually matters when deciding between the two options for real workloads, not just defaults.
7 min read
Installation & Initial Setup
Migrate from VMware ESXi to Proxmox VE in 2026
Migrating VMware ESXi workloads no longer requires a leap of faith; here's what changed since earlier comparisons that makes today the right time to move.
10 min read
Virtualization & VM Management
Proxmox VE 9.2 Dynamic Load Balancer for HA Clusters
Flip one toggle in VE 9.2 and your cluster live-migrates HA guests off overloaded nodes on its own, no cron jobs needed.
9 min read
Installation & Initial Setup
Migrating Your VMware ESXi Workloads to Proxmox VE
Migrating VMs off VMware ESXi is rarely just about saving on licensing—it's usually the consolidation story that drives the decision forward.
7 min read
Storage, ZFS & Backup Strategies
Proxmox File Serving with ZFS: Setup Guide for Homelabs
Most homelab file serving doesn't need a separate NAS — here's how to get ZFS-backed shares working reliably on Proxmox without the pitfalls most guides skip.
11 min read
LXC Containers & Docker
Unprivileged LXC vs KVM VMs: When to Use Each on Proxmox
Unprivileged LXC containers on Proxmox VE often outperform equivalent VMs in speed and resource use without sacrificing much isolation or capability.
9 min read
Installation & Initial Setup
Raspberry Pi 5 Homelab with Proxmox VE: Setup, Tuning & Storage
The Cortex-A76 cores in the Pi 5 handle real workloads without emulation overhead when you pin your CPUs right.
10 min read
Storage, ZFS & Backup Strategies
Optimizing ZFS Pools in Proxmox VE: Storage Tuning Guide
Most people configure their storage correctly but leave performance bleeding out in the details nobody notices until something breaks — here's how to fix it.
10 min read
Installation & Initial Setup
Upgrade Proxmox VE 9 to 9.1 Without Breaking Your Cluster
PVE 9.1 adds native OCI image support for LXC — here's how to upgrade without losing quorum or breaking storage.
9 min read
Installation & Initial Setup
Proxmox VE Nested Virtualization for Homelab Testing
Test Proxmox clusters and upgrade paths without touching production — two commands enable nested virtualization on any modern CPU.
8 min read
LXC Containers & Docker
How to Snapshot and Clone LXC Containers in Proxmox
On ZFS or LVM-Thin, pct snapshot takes two seconds and pct rollback takes three, making rollback a practical reflex.
9 min read
Networking, VLANs & Security Hardening
CrowdSec on Proxmox: Cluster-Wide Brute-Force Defense
CrowdSec pre-blocks thousands of known attacker IPs before they reach your Proxmox node — here is the full cluster-ready setup.
7 min read
Installation & Initial Setup
Proxmox VE LDAP and Active Directory Authentication
Stop managing Proxmox local users manually — connect to your existing LDAP or Active Directory and assign roles to security groups.
11 min read
Storage, ZFS & Backup Strategies
LVM-Thin Pools on Proxmox for VM Snapshots Without ZFS
LVM-thin gives you copy-on-write VM snapshots on any block device — no ECC RAM, no ZFS memory tax, instant rollback.
9 min read
LXC Containers & Docker
Self-Host OpenClaw AI Assistant in Proxmox LXC
Run OpenClaw in a Proxmox LXC for a private, always-on homelab AI that connects to Telegram, Discord, and more.
11 min read
LXC Containers & Docker
Proxmox LXC Templates: Build and Deploy Custom Containers
Stop configuring containers from scratch. Build once, deploy anywhere with custom Proxmox LXC templates.
10 min read